본문 : http://www.ischo.net -- 조인상 //시스템 엔지니어

+++++++++++++++++++++++++++++++++++++++++++++++++++++++


[목차]

1. 설치/제거
2. 라이브러리 설정


[1. 설치/제거]


<설치>

funfire28.root:[/cdrom/nb_45_dc_bs]# ls
Doc/      NBClients/  install*  solaris/
NB-Java/  hp-ux/    linux/
funfire28.root:[/cdrom/nb_45_dc_bs]# ./install


VERITAS Installation Script
Copyright 1993 - 2002 VERITAS Software Corporation, All Rights Reserved.

      Installation Options

      1 NetBackup
      2 NetBackup Client Software
      3 NetBackup Client Java Software

      q To quit from this script
Choose an option [default: q]: 1

패키지 예 <VRTSnetbp>(을)를 </cdrom/nb_45_dc_bs/solaris>에서 처리 중

VERITAS NetBackup and Media Manager
(sparc) 4.5,REV=2002.03.26.15.05
Copyright 1993 - 2002 VERITAS Software Corporation, All Rights Reserved.

      NetBackup and Media Manager 4.5GA will be installed.


      There is an existing link from /usr/openv to /opt/openv.

      NetBackup and Media Manager binaries will be installed in
      /opt/openv

      Is this okay? (y) [y,n,?,q] y

      The Solaris clients will be loaded.

      Do you want to load any other NetBackup
      clients onto the server? (y) [y,n,?]y
      The Solaris clients will be loaded.

      Do you want to load any other NetBackup
      clients onto the server? (y) [y,n,?] y 


      Choose the Platform Client types you wish to install
      by selecting the platform type one at a time
      or select ALL client platforms.

      Platform Client Options
      -----------------------
      1. Alpha
      2. DataGeneral
      3. HP9000
      4. INTEL (FreeBSD)
      5. Linux (RedHat)
      6. MACINTOSH (MacOSX and MacOSXS1.2)
      7. NCR
      8. IBM RS6000
      9. SCO
      10. SGI
      11. Sequent
      12. Solaris
      13. ALL client platforms
      q Quit client selection


      Enter Choice (Default is 13)  [1-13,?,q] 12

      Enter Choice (Default is 13)  [1-13,?,q] q
      You have chosen to install:

      Solaris

      Is this the list you wish to use? (y) [y,n,?] y


pied files to /kernel/drv and to /kernel/drv/sparcv9.

Doing add_drv of the sg driver
Creating /dev/sg.
Added entry in /etc/devlink.tab file.
Made links in /dev/sg
Media Manager configuration was successful.



      The NetBackup and Media Manager binaries are installed.
      Read the release notes carefully.

      If you ran pkgadd instead of ./install, you must run
      /usr/openv/netbackup/bin/install_bp to initiate NetBackup.
<VRTSnetbp>(이)가 성공적으로 설치되었습니다.
Running /usr/openv/netbackup/bin/install_bp


A NetBackup BusinesServer or DataCenter license key is needed
for installation to continue.

Enter license key: BJX3-DNR3-RWOP-NPPP-PPPP-P6CB-HP
BJX3-DNR3-RWOP-NPPP-PPPP-P6CB-HP: has an invalid check-sum (223)

A NetBackup BusinesServer or DataCenter license key is needed
for installation to continue.

Enter license key:
Enter license key: BJX3-D3CR-RWCL-WPZP-PPPP-PCPP-NP62-EP

BJX3-D3CR-RWCL-WPZP-PPPP-PCPP-NP62-EP:
      NetBackup BusinesServer Base product
      has been registered.


All additional keys should be added at this time.
Do you want to add additional license keys now? (y/n) [y]


      License Key Utility
      -------------------

      A) Add a License Key
      D) Delete a License Key
      F) List Active License Keys
      L) List Registered License Keys
      H) Help
      q) Quit License Key Utility
Enter a letter: q

Installing NetBackup BusinesServer version: 4.5GA

Linking /usr/openwin/lib/app-defaults/XNB --> /usr/openv/netbackup/bin/XNB.dt

Checking for a bpcd entry in /etc/inetd.conf:  Adding bpcd entry.
Original /etc/inetd.conf saved as /etc/inetd.conf.NBU_030905.19:46:06.
Checking for a vnetd entry in /etc/inetd.conf:  Adding vnetd entry.
Checking for a vopied entry in /etc/inetd.conf:  Adding vopied entry.
Checking for a bpjava-msvc entry in /etc/inetd.conf:  Adding bpjava-msvc entry.

Checking /etc/services for the needed NetBackup and Media Manager services.

Copying original /etc/services file to /etc/services.NBU_030905.19:50:05
Editing /etc/services to update NetBackup and Media Manager services.

/etc/services will be updated to add the following entries for NetBackup/Media M
anager.

bprd  13720/tcp    bprd
bpcd  13782/tcp    bpcd
bpdbm  13721/tcp    bpdbm
vnetd  13724/tcp    vnetd
vopied  13783/tcp    vopied
bpjobd  13723/tcp    bpjobd
nbdbd  13784/tcp    nbdbd
visd  9284/tcp      visd
bpjava-msvc    13722/tcp    bpjava-msvc
vmd    13701/tcp    vmd
acsd  13702/tcp    acsd
tl8cd  13705/tcp    tl8cd
tldcd  13711/tcp    tldcd
ts8d  13709/tcp    ts8d
odld  13706/tcp    odld
tl4d  13713/tcp    tl4d
tsdd  13714/tcp    tsdd
tshd  13715/tcp    tshd
tlmd  13716/tcp    tlmd
tlhcd  13717/tcp    tlhcd
lmfcd  13718/tcp    lmfcd
rsmd  13719/tcp    rsmd

To change these entries modify the file /tmp/services.ov_edited.10893
and enter <RETURN> when ready to continue:
RNING: ypwhich:  the domainname hasn't been set on this machine.

WARNING: ypcat:  the domainname hasn't been set on this machine.

Sending SIGHUP to inetd process.


To make NetBackup and Media Manager startup automatically
when the system is restarted, the netbackup script found in
/usr/openv/netbackup/bin/goodies/netbackup has been placed in /etc/init.d ,
with links to it placed in the /etc/rc2.d directory.


To make NetBackup and Media Manager shutdown automatically
when the system is restarted, the netbackup script found in
/usr/openv/netbackup/bin/goodies/netbackup has been placed in /etc/init.d ,
with links to it placed in the /etc/rc0.d directory.


Extracting NetBackup-Java product files.


Installing NetBackup-Java, and the Java runtime environment for SunOS 5.9.

Configuring NetBackup-Java runtime environment.

The installation of the NetBackup-Java product on funfire28 is complete.



Set global device configuration host failed.

Starting the NetBackup database manager process (bpdbm).

Creating policy and schedule examples that you can view or use
when you are configuring your own policies and schedules.
... creating policy template_normal
... creating schedules for policy template_normal
... creating policy template_weekend
... creating schedules for policy template_weekend
Done creating example policies and schedules.
Creating Directive Set for LotusNotes
Creating Directive Set for MS_Exchange_5.x
Creating Directive Set for MS_Exchange_Mailbox
Creating Directive Set for MS_Exchange_2000
Creating Directive Set for Windows2000


Running index_clients process in background mode.
Output from the process will be written to /tmp/index_clients.output.

The global device database version is incompatible

Starting the Media Manager device daemon processes.

Starting the NetBackup request daemon process (bprd).




VERITAS Installation Script
Copyright 1993 - 2002 VERITAS Software Corporation, All Rights Reserved.

      Installation Options

      1 NetBackup
      2 NetBackup Client Software
      3 NetBackup Client Java Software

      q To quit from this script
Choose an option [default: q]:
A trace of the install can be found in /tmp/install_trace.10279
That file can be deleted after you are sure the install was successful.
funfire28.root:[/cdrom/nb_45_dc_bs]#



<제거>

unfire28.root:[/opt/openv/netbackup/bin]#
funfire28.root:[/opt/openv/netbackup/bin]# pkginfo | grep netbp
application VRTSnetbp                VERITAS NetBackup and Media Manager
funfire28.root:[/opt/openv/netbackup/bin]# pkgrm VRTSnetbp





[2. 라이브러리 설정]

1. netbackup program install

2. 패스 설정
/opt/openv/netbackup/bin /usr/openv/netbackup/bin/admincmd /usr/openv/netbackup/bin/goodies /usr/openv/volmgr/bin

3. bpstop, bpstart 스트립트 생성
  /usr/openv/netbackup/bin 밑에 생성한다.
 
  #bpstop
  /usr/openv/netbackup/bin/goodies/bp.kill_all
  #bpstart
  /usr/openv/netbackup/bin/initbprd
  /usr/openv/volmgr/bin/ltid

4. netbackup server 와 clinet에 모두 /etc/hosts 파일에 아이피를 등록해 준다

5. tape 장치 인식 시키기

sgscan tape conf -v
Tape device types enabled in the Solaris tape driver, st(7D), configuration file:
HP    Ultrium:Ultrium

Tape devices recognized by the SCSI Generic (sg) driver:
/dev/sg/c1t5l0: (/dev/rmt/0): "HP    Ultrium 1-SCSI  E33A" : Ultrium

위와 같이 장치가 제대로 인식이 되어야 하는데 위와 같은 식으로 나오지 않을 경우에는 아래의 파일들을 확인해 본다.

vi /kernel/drv/st.conf

"HP    Ultrium","HP    Ultrium","Ultrium",
Ultrium = 1,0x36,0,0xd639,4,0x00,0x00,0x00,0x40,3;

tape-config-list=

처음것은 추가를 시켜주고 두번째것은 # 표시를 제거을 시켜 준다.

위에 "HP    Ultrium","HP    Ultrium","Ultrium",
Ultrium = 1,0x36,0,0xd639,4,0x00,0x00,0x00,0x40,3;
이것은 HP 장비의 LTO1일 경우에는 쓰는 것이고 LTO2일 경우에는
"HP    Ultrium","HP    Ultrium","Ultrium",
Ultrium = 1,0x36,0,0xd639,4,0x00,0x00,0x00,0x42,3;
로 쓰면 된다.
그리고 이것은 장비마다 다르기에 확인해서 장비에 맞는 것을 추가 시켜 주면 된다.

그러면 이제 본격적으로 장치를 netbackup 프로그램에 인식 시켜 보겠다.
일단 명령어로 로보과 미디어를 인식시키기 위해서는 netbackup에 관련된 모든 데몬을 죽이고
vmd라는 데몬만 살려놓은 상태에서 해야 한다.

sunfire280.root:[/]# bpstop
sunfire280.root:[/]# bpstop

Looking for Media Manager processes that need to be terminated.
Stopping vmd...

Looking for NetBackup processes that need to be terminated.
sunfire280.root:[/]# bpps -a
NB Processes
------------


MM Processes
------------
sunfire280.root:[/]# vmd
sunfire280.root:[/]# bpps -a
NB Processes
------------


MM Processes
------------
  root 17425    1  0 19:38:33 ?      0:00 vmd
sunfire280.root:[/]#

이 상태에서 tpconfig 로 세팅을 해주면 된다.

          Device Management Configuration Utility

      1) Drive Configuration
      2) Robot Configuration
      3) Volume Database Host Configuration
      4) Print Configuration
      5) Help
      6) Quit

Enter option:

순서는 로버을 먼저 세팅을 하고 드라이버를 세팅을 하면 된다.

2번을 선택을 한다.
          Robot Configuration

      1) Add
      2) Delete
      3) Update
      4) List Configuration
      5) Help
      6) Quit - return to main menu

Enter option:

1번을 선택을 한다.
\
      1) RSM - Removable Storage Manager (Windows platforms only)
      2) TL4 - Tape Library 4MM : DAT
      3) TL8 - Tape Library 8MM : AIT
      4) TLD - Tape Library DLT : DLT, LTO 장치일때 선택
      5) TS8 - Tape Stacker 8MM
      6) TSD - Tape Stacker DLT
4번을 선택을 한다.
sunfire280.root:[/]# sgscan changer conf -v
/dev/sg/c1t0l0: "ADIC  FastStor 2    A11r"

SM - Removable Storage Manager (Windows platforms only)
      2) TL4 - Tape Library 4MM
      3) TL8 - Tape Library 8MM
      4) TLD - Tape Library DLT
      5) TS8 - Tape Stacker 8MM
      6) TSD - Tape Stacker DLT

Enter Robotic Type (1 - 5): 4

Enter robot number or <RETURN> to use default (0):
Enter SCSI path for TLD robotic control: /dev/sg/c1t0l0
Robotic definition added for TLD(0)

Press any key to continue

그런 다음에 드라이버를 세팅을 한다.
          Device Management Configuration Utility

      1) Drive Configuration
      2) Robot Configuration
      3) Volume Database Host Configuration
      4) Print Configuration
      5) Help
      6) Quit

Enter option:
1번을 선택을 한다.

          Drive Configuration

      1) Add
      2) Delete
      3) Update
      4) List Configuration
      5) Help
      6) Quit - return to main menu

Enter option:
1번을 선택을 한다.
Enter drive name or <RETURN> to use default (Drive0):

      1) 1/4" Cartridge (qscsi)
      2) 1/2" Cartridge (hcart) : LTO 장치 미디어일때 선택
      3) 4mm Cartridge (4mm) : DAT 미디어일때 선택
      4) 8mm Cartridge (8mm) :
      5) DLT Cartridge (dlt)

Enter Drive Type (1 - 5):2 (미디어가 LTO장치이기 때문에)
Enter drive name or <RETURN> to use default (Drive0):

      1) 1/4" Cartridge (qscsi)
      2) 1/2" Cartridge (hcart)
      3) 4mm Cartridge (4mm)
      4) 8mm Cartridge (8mm)
      5) DLT Cartridge (dlt)

Enter Drive Type (1 - 5): 2
Enter NonRewindDrivePath: /dev/rmt/0cbn : cbn은 꼭 붙어야 한다.
Enter drive status - (u)p or (d)own: u

Do you want to configure this drive in a robot? (y/n) n:
y을 선택을 한다.
Enter drive name or <RETURN> to use default (Drive0):

      1) 1/4" Cartridge (qscsi)
      2) 1/2" Cartridge (hcart)
      3) 4mm Cartridge (4mm)
      4) 8mm Cartridge (8mm)
      5) DLT Cartridge (dlt)

Enter Drive Type (1 - 5): 2
Enter NonRewindDrivePath: /dev/rmt/0cbn
Enter drive status - (u)p or (d)own: u

Do you want to configure this drive in a robot? (y/n) n:
Drive being added to:
  TLD(0)    robotic path = /dev/sg/c1t0l0,
        volume database host = sunfire280

Enter TLD robot drive number (1 - 2): 1 : 로보이 하나이기에 당연이 1번을 선택을 한다.

Drive name Drive0 has been added

*************Drive Information****************

      Drive Name          Drive0
      Index            0
      NonRewindDrivePath    /dev/rmt/0cbn
      Type              hcart
      Status            UP
      Shared Access        No
      TLD(0) Definition    DRIVE=1

Press any key to continue



그러면 이제 장치 구성은 모두 끝났다.

이제 bpstop 후 bpstart로 데몬을 다시 시작한후 netbackup을 시작해서 netbackup안에서
구성 사항들을 정리해 보겠다.

프로그램 실행후

1. media -> inventory robot  -> perform volumn configuration update -> start
하면 미디어가 잡힌다.

2. 그러면 이제 full에 미디어을 할당을 해준다.
기본적으로 netbacukp을 설치를 하면

media->volume pools에 netbacup, datastore, none 3가지가 있는데 datastore와 none은 삭제를 해도
상관이 없지만 netbackup을 삭제을 하면 netbackup 프로그램이 제대로 작동을 하지 않는다.

media는 기본적으로 netbackup가 다 포함되어 있다.
다른 full에 옮길 미디어를 선택을 한다음 change을 눌러서 이동을 시키면 된다.

media-> volume pools -> netbckup -> 미디어 선택 -> change -> volume pool의 new pool을 선택후

오른쪽에서 풀을 선택을 한다.

3. 카테고리 설정
catalog -> configure netbackup catalog backup -> mediate type은 removeable 선택하고 
volume에서 미디어를 선택을 한다.

4. mager server 설정

host propertites -> 서버 목록을 더블 클릭하고 -> media 을 선택후

allow media overwrite을 모두 선택을 한다.

host propertites -> 서버목록을 선택을 하고 -> logging을 선택을 한후

global logging level 을 5로 선택을 한다.


그러면 일단 기본적인 세팅은 끝났고

이제 새로운 풀과 백업 정책을 수립을 해서 테스트를 해보면 된다...


storage unit에서 storage unit 생성
robot type : TLD-Tape Library DLT robot number : 0
drive density : hcart-1/2 inch cartridege
다른것은 1 1로 세팅

hostpropertites에서 마스테 서버와 클라이 언트 세팅을 해야함.

Posted at 2006-03-29 Wed 18:51

조인상

추가내용 drive가 down 상태일때 up시키는 방법(drive number가 0일 경우) # vmoprcmd -up 0